Bronze Spike Fitting – Verdigris

Bronze Spike Fitting – Verdigris

This product has an IP rating of 44

Availability: 6 in stock SKU: GZ/BRONZE6
  • Additional information
  • Garden Zone Installation
  • Guarantee

Additional information

Weight 1.2 kg
Dimensions 15 × 10 × 8 cm
Fitting Height

130mm

Width

63mm

Finish

Verdigris

Class

Class III

IP Rating

IP44

Number of lamps

Three

Maximum Wattage

1

Integrated LED

Yes

Voltage

12v

Energy Rating

A++ – A

Build Materials

Cast Bronze

Brand

Garden Zone

Family

Interior/Exterior

Product Style

Product Type

Country of Origin

PRC

Made in England

No

Barcode

5024005500308

PLUG & GO: HOW IT WORKS

Step 1: Choose the areas you want to have lit, then we suggest that you sketch a rough plan view of each area involved.

Step 2: Choose the fi ttings which will suit the requirements and list them out with the quantity of each where relevant. Be careful to bear in mind the voltage of the fi ttings chosen. All 220-240V fi ttings will need mains supply to wherever they are to be installed whereas all plug & go models just need to be connected into the low voltage cable (as shown below).

Step 3: Measure the distance involved for the plug & go models chosen and determine, from the cable set options available which cable set or sets will be needed. Remember, up to 80 metres of cable can be used from 1 LED driver but the wattage loading must not exceed the recommended minimum, maximum (see accessories page 209).

Step 4: Plan where the mains supply will originate from. With the plug & go system you have a choice of placing the LED driver/drivers in an IP rated wall box on an exterior wall. However, depending on how large an area is involved, sometimes more than one mains feed may be needed in diff erent locations. Consultation with an electrician is advisable on this matter.

Important
Plug & go fittings use a unique single pin, 2 pole plug and as such are not compatible with any other product or system. Currently they are not dimmable but they will work when wired via a timer.

Within our catalogue there are a number of products incorporating PIR sensors or LED modules.  Whilst the fittings themselves may have varying physical guarantees against corrosion, these electronic parts are covered by a 2 year guarantee against failure. After this period, they are still repairable and serviceable, either by the company or local supplier.