Garden Zone Cable Extension 20M

Garden Zone Cable Extension 20M

Availability: 50 in stock SKU: GZ/CABLE 20M
  • Additional information
  • Garden Zone Installation

Additional information

Weight 1.5 kg
Dimensions 26 × 13 × 26 cm
Class

Class I

Integrated LED

No

Voltage

12v

Brand

Garden Zone

Family

Interior/Exterior

Product Style

Product Type

Country of Origin

PRC

Made in England

No

Barcode

5024005505006

PLUG & GO: HOW IT WORKS

Step 1: Choose the areas you want to have lit, then we suggest that you sketch a rough plan view of each area involved.

Step 2: Choose the fi ttings which will suit the requirements and list them out with the quantity of each where relevant. Be careful to bear in mind the voltage of the fi ttings chosen. All 220-240V fi ttings will need mains supply to wherever they are to be installed whereas all plug & go models just need to be connected into the low voltage cable (as shown below).

Step 3: Measure the distance involved for the plug & go models chosen and determine, from the cable set options available which cable set or sets will be needed. Remember, up to 80 metres of cable can be used from 1 LED driver but the wattage loading must not exceed the recommended minimum, maximum (see accessories page 209).

Step 4: Plan where the mains supply will originate from. With the plug & go system you have a choice of placing the LED driver/drivers in an IP rated wall box on an exterior wall. However, depending on how large an area is involved, sometimes more than one mains feed may be needed in diff erent locations. Consultation with an electrician is advisable on this matter.

Important
Plug & go fittings use a unique single pin, 2 pole plug and as such are not compatible with any other product or system. Currently they are not dimmable but they will work when wired via a timer.